Artesyn ATCA-8310 Installation and Use (May 2014) - Manual (Page 406)

CPLD and FPGA
ATCA-8310 Installation and Use (6806800M72E) 406
8.4.2.7 DSP Status and Interrupt Block (DspStaIntBlk)
Resets:
Pwr = Power On Reset
Soft = Soft Reset
3...0 DspSel RW 0b0000: DspSel0, selects the DSP0 device
for the LRESET and NMI command
0b0000: DspSel0, selects the DSP0 device
for the LRESET and NMI command
0b0001: DspSel1, selects the DSP1 device
for the LRESET and NMI command
0b0010: DspSel2, selects the DSP2 device
for the LRESET and NMI command
0b0011: DspSel3, selects the DSP3 device
for the LRESET and NMI command
0b0100: DspSel4, selects the DSP4 device
for the LRESET and NMI command
0b0101: DspSel5, selects the DSP5 device
for the LRESET and NMI command
0b0110: DspSel6, selects the DSP6 device
for the LRESET and NMI command
0b0111: DspSel7, selects the DSP7 device
for the LRESET and NMI command
0b1000: DspSel8, selects the DSP8 device
for the LRESET and NMI command
0b1001: DspSel9, selects the DSP9 device
for the LRESET and NMI command
0b101*: reserved
0b110*: reserved
0b1110: reserved
0b101*: reserved
0b1111: DspSelAll, selects all DSPs for the
LRESET and NMI command 0b0000 X X
Table 8-199 DSP Local Reset and NMI Control Register (continued)
Bit Acronym Type Description Default Pwr Soft