PLANET WGSW-52040 - Manual (Page 96)

1-95
1.4.11 show snmp view
Command:
show snmp view
Function:
Display the view information commands.
Command Mode:
Admin and Configuration Mode.
Example:
Switch#show snmp view
View Name:readview 1. -Included active
1.3. Excluded active
Displayed Information Explanation
View Name View name
1.and1.3. OID number
Included The view includes sub trees rooted by this OID
Excluded The view does not include sub trees rooted by
this OID
active State
1.4.12 snmp-server community
Command:
snmp-server community {ro | rw} {0 | 7} [access {|}] [ipv6-access
{|}] [read ] [write ]
no snmp-server community [access {|}] [ipv6-access
{|}]
Function:
Configure the community string for the switch; the no command deletes the configured community string.
Parameter:
is the configured community string. If key option is set as 0, the specified community string is not encrypted,
if key option is set as 7, the specified community string is encrypted;