PLANET WGSW-52040 - Manual (Page 84)

1-83
Command Mode:
Admin and Configuration Mode.
Usage Guide:
Check the Telnet client messages connected through Telnet with the switch.
Example:
Switch#show telnet login
Authenticate login by local
Login user:
Aa
1.2.27 show users
Command:
show users
Function:
Show the user information who logs in through telnet or ssh. It includes line number, user name and user IP.
Command mode:
Admin Mode.
Usage Guide:
When inputting this command, show the user information who logs in through telnet or ssh. It includes line number,
user name and user IP. Because 16 telnet users and 16 ssh users are supported at most currently, vty0-15 are used
for telnet, and 16-31 are used for ssh.
Example:
Switch#show users
Line User Location
vty 16 a 192.168.1.1
vty 0 admin 192.168.1.2
vty 17 mab 192.168.1.13
vty 1 test 192.168.1.40