Chapter 28 commands for dhcp, 1 commands for dhcp server configuration, 1 bootfile – PLANET WGSW-52040 User Manual
Page 434: 2 clear ip dhcp binding, Chapter 28 commands for dhcp -45, Ommands for, Dhcp, Erver, Onfiguration, 1 bootfile -45
28-45
Chapter 28 Commands for DHCP
28.1 Commands for DHCP Server Configuration
28.1.1 bootfile
Command:
bootfile
no bootfile
Function:
Sets the file name for DHCP client to import on boot up; the “no bootfile “command deletes this setting.
Parameters:
Command Mode:
DHCP Address Pool Mode
Usage Guide:
Specify the name of the file to be imported for the client. This is usually used for diskless workstations that need to
download a configuration file from the server on boot up. This command is together with the “next sever”.
Example:
The path and filename for the file to be imported is “c:\temp\nos.img”
Switch(dhcp-1-config)#bootfile c:\temp\nos.img
Related Command: next-server
28.1.2 clear ip dhcp binding
Command:
clear ip dhcp binding { | all}
Function:
Deletes the specified IP address-hardware address binding record or all IP address-hardware address binding
records.