PLANET WGSW-52040 - Manual (Page 278)

17-47
Command Mode:
Admin and Configuration Mode.
Usage Guide:
Display the information of all the ports at VLAN-translation state.
Example:
Display current VLAN translation state information.
Switch#show vlan-translation
Interface Ethernet1/1:
vlan-translation is enable
Interface Ethernet1/2:
vlan-translation is enable
Interface Ethernet1/3:
vlan-translation is enable
17.1.27 switchport access vlan
Command:
switchport access vlan <vlan-id>
no switchport access vlan
Function:
Add the current Access port to the specified VLAN. The “no switchport access vlan” command deletes the current
port from the specified VLAN, and the port will be partitioned to VLAN1.
Parameter:
<vlan-id> is the VID for the VLAN to be added the current port, valid range is 1 to 4094.
Command mode:
Port Mode.
Default:
All ports belong to VLAN1 by default.
Usage Guide:
Only ports in Access mode can join specified VLANs, and an Access port can only join one VLAN at a time.