PLANET WGSW-52040 - Manual (Page 520)

32-60
%Jan 01 01:38:45 2006 requested-option: vendor specific info
%Jan 01 01:38:45 2006 remote-id option(37), option-len 14
%Jan 01 01:38:45 2006 remote-id : 0x0a0b0c
%Jan 01 01:38:45 2006 subscriber-id option(38), option-len 16
%Jan 01 01:38:45 2006 subscriber-id : 0x0a0b0c0d
32.2.2 debug ipv6 dhcp relay packet
Command:
debug ip dhcp relay packet
Function:
Display the information of relay packet processing.
Parameters:
None.
Command Mode:
Admin mode
Usage Guide:
This command is used to display the process of relay packet processed by relay agent together with the action
information of option 37 and option 38.
Example:
Switch# debug ip dhcpv6 relay packet
%May 19 16:45:34 2010 DHCPv6 RELAY PACKET: received msg0 from on
%May 19 16:45:34 2010 DHCPv6 RELAY PACKET: add subscriber-id option “Vlan8+Ethernet1/12”
32.2.3 debug ipv6 dhcp snooping packet
Command:
debug ipv6 dhcp snooping packet
Function:
Debug the packets of DHCPv6 SNOOPING. Corresponding information will also be displayed when adding or