PLANET WGSW-52040 - Manual (Page 184)

8-183
Set the delay of sending messages as 3 seconds.
Switch(config)#lldp transmit delay 3
8.12 lldp transmit optional tlv
Command:
lldp transmit optional tlv [portDesc] [sysName] [sysDesc] [sysCap]
no lldp transmit optional tlv
Function:
Configure the type of optional TLV of the port.
Parameters:
portDesc: the description of the port; sysName: the system name; sysDesc: The description of the system;
sysCap: the capability of the system.
Default:
The messages carry no optional TLV by default.
Command Mode:
Port Configuration Mode.
Usage Guide:
When configuring the optional TLV, each TLV can only appear once in a message, portDesc optional TLV
represents the name of local port; sysName optional TLV represents the name of local system; sysDesc optional
TLV represents the description of local system; sysCap optional TLV represents the capability of local system.
Example:
Configure that port ethernet 1/5 of the switch carries portDesc and sysCap TLV.
Switch(config)#in ethernet 1/5
Switch(Config-If-Ethernet1/5)# lldp transmit optional tlv portDesc sysCap
8.13 lldp trap
Command:
lldp trap <enable | disable>