PLANET WGSW-52040 - Manual (Page 721)

48-261
Default:
MAC address of the switch
Usage Guide:
Use this configuration to create access-node-id of circuit ID in vendor tag. circuit-id value is access-node-id +” eth “+
Slot ID + delimiter + Port Index + delimiter + Vlan ID, access-node-id occupies n bytes (n<48), “ eth “ is space + e + t
+ h + space, it occupies 5 bytes, Slot ID occupies 2 bytes, Port Index occupies 3 bytes, Vlan ID occupies 4 bytes,
delimiter occupies 1 byte. In default state, access-node-id value of circuit-id is switch’s MAC, it occupies 6 bytes. For
example: MAC address is “0a0b0c0d0e0f”, Slot ID is 12, Port Index is 34, Vlan ID is 567, the default circuit-id value
is “0a0b0c0d0e0f eth 12/034:0567”.
Example:
Configure access-node-id value of circuit ID as abcd in vendor tag.
Switch(config)#pppoe intermediate-agent access-node-id abcd
After port ethernet1/3 of vlan3 receives PPPoE packets, circuit-id value of the added vendor tag is ”abcd eth
01/003:0003”.
48.12 pppoe intermediate-agent type tr-101 circuit-id
identifier-string option delimiter
Command:
pppoe intermediate-agent type tr-101 circuit-id identifier-string option {sp | sv | pv | spv} delimiter
[delimiter ]
no pppoe intermediate-agent type tr-101 circuit-id identifier-string option delimiter
Function:
Configure circuit-id of the added vendor tag with tr-101 standard, the no command deletes this configuration.
Parameter:
: identifier-string, the max character number is 47 bytes.
{sp | sv | pv | spv}: This option can select the combination format for slot, port, vlan, sp means slot and port, sv
means slot and vlan, pv means port and vlan, spv means slot, port and vlan.
: The delimiter between slot, port and vlan, the range is (# | . | , | ; | : | / | space). Note: There are two
delimiter WORDs in spv combo mode, the first between slot and port, the second between port and vlan.
Command Mode:
Global mode