PLANET WGSW-52040 - Manual (Page 859)

63-399
Switch#show logging buffered level warning
63.15 show logging executed-commands state
Command:
show logging executed-commands state
Function:
Show the state of logging executed-commands.
Parameter:
None.
Command Mode:
Admin mode.
Default:
None.
Usage Guide:
Use this command to display the state (enable or disable).
Example:
Switch#show logging executed-commands state
Logging executed command state is enable
63.16 show logging source
Command:
show logging source mstp
Function:
Show the log information source of MSTP module.
Parameters:
None.