PLANET WGSW-52040 - Manual (Page 823)

60-363
60.5 debug ntp packet
Command:
debug ntp packet [send | receive]
no debug ntp packet [send | receive]
Function:
To enable/disable the debug switch of displaying NTP packet information.
Parameter:
send: The debug switch of sending NTP packet.
receive: The debug switch of receiving NTP packet.
If there is no parameter, that means should enable the sending and receiving switch of NTP packet in the same time.
Default:
Disabled.
Command Mode:
Admin Mode.
Usage Guide:
None.
Example:
To enable the debug switch of displaying NTP packet information.
Switch# debug ntp packet
60.6 debug ntp sync
Command:
debug ntp sync
no debug ntp sync
Function:
To enable/disable debug switch of displaying local time synchronization information.
Parameter: