PLANET WGSW-52040 - Manual (Page 140)

4-139
4.1.2 clear counters interface
Command:
clear counters [interface {ethernet | vlan | port-channel |
}]
Function:
Clears the statistics of the specified port.
Parameters:
stands for the Ethernet port number; stands for the VLAN interface number;
for trunk interface number; for interface name, such as port-channel 1.
Command mode:
Admin Mode.
Default:
Port statistics are not cleared by default.
Usage Guide:
If no port is specified, then statistics of all ports will be cleared.
Example:
Clearing the statistics for Ethernet port1/1.
Switch#clear counters interface ethernet 1/1
4.1.3 description
Command:
description
no description
Function:
Set name for specified port; the no command cancels this configuration.
Parameter:
is a character string, which should not exceeds 200 characters.