PLANET WGSW-52040 - Manual (Page 58)

1-57
Switch#write
Switch#reload
1.1.29 setup
Command:
Setup
Function:
Enter the Setup Mode of the switch.
Command mode:
Admin Mode.
Usage Guide:
Switch provides a Setup Mode, in which the user can configure IP addresses, etc.
1.1.30 show clock
Command:
show clock
Function:
Display the current system clock.
Command mode:
Admin and Configuration Mode.
Usage Guide:
If the system clock is inaccurate, user can adjust the time by examining the system date and clock.
Example:
Switch#show clock
Current time is TUE AUG 22 11：00：01 2002
Command related: clock set