PLANET WGSW-52040 - Manual (Page 363)

20-132
In-DSCP Value 0-7 8-15 16-23 24-31 32-39 40-47 48-55 56-63
Out-DSCP Value 0 8 16 24 32 40 48 56
Command mode:
Global Mode
Usage Guide:
INTP means the chip internal priority setting. Because of the internal DSCP value have 64 and the chip internal
priority (queue) only 8, the dscp-intp mapping need 8 continuum internal dscp mapping to the same INTP.
Example:
1. Setting the CoS-to-INTP mapping value to the default 0 8 16 24 32 40 48 56 to 0 1 2 3 3 2 1 0.
Switch(config)#mls qos map cos-intp 0 1 2 3 3 2 1 0
20.9 mls qos queue algorithm
Command:
mls qos queue algorithm {sp | wrr| wdrr }
no mls qos queue algorithm
Function:
After configure this command, the queue management algorithm is set.
Parameters:
sp: The strict priority, the queue number of bigger, then the priority is higher
wrr: Select wrr algorithm
wdrr: Select wdrr algorithm
Default:
The default queue algorithm is wrr.
Command mode:
Global Mode.
Usage Guide:
After configure this command, the queue management algorithm is set.