29 traceroute, 30 traceroute6, Traceroute – PLANET WGSW-52040 User Manual
Page 868
63-408
Admin Mode
Usage Guide:
Use this command to view the version information for the switch, including hardware version and software version.
Example:
Switch#show version
63.29 traceroute
Command:
traceroute [source
Function:
This command is tests the gateway passed in the route of a packet from the source device to the target device. This
can be used to test connectivity and locate a failed sector.
Parameter:
<ipv4-addr> is the assigned source host IPv4 address in dot decimal format.
in dot decimal format.
allowed by Traceroute command.
-10000.
Default:
The default maximum gateway number is 30, timeout in 2000 ms.
Command mode:
Admin Mode
Usage Guide:
Traceroute is usually used to locate the problem for unreachable network nodes.
63.30 traceroute6
Command: