Chapter 10 commands for mtu, 1 mtu, Chapter 10 commands for mtu -198 – PLANET WGSW-52040 User Manual

Page 199

10-198

Chapter 10 Commands for MTU

10.1 mtu

Command:

mtu []

no mtu

Function:

Configure the MTU size of JUMBO frame, enable the jumbo receiving/sending function. The no command restores to

the normal frame receiving function.

Parameter:

mtu-value: the MTU value of frames that can be received, in byte, ranging from <1500-16000>. The corresponding

frame size is <1518/1522-16018/16022>. Without setting is parameter, the allowed max frame size is 16018/16022.

Default:

MTU function not enabled by default.

Command Mode:

Global Mode

Usage Guide:

Set switch of both ends mtu necessarily, or mtu frame will be dropped at the switch has not be set.

Example:

Enable the mtu function of the switch.

Switch(config)#mtu