PLANET WGSW-52040 - Manual (Page 564)

35-104
35.2.3 debug igmp snooping all/packet/event/timer/mfc
Command:
debug igmp snooping all/packet/event/timer/mfc
no debug igmp snooping all/packet/event/timer/mfc
Function:
Enable the IGMP Snooping switch of the switch; the “no debug igmp snooping all/packet/event/timer/mfc”
disables the debugging switch.
Command Mode:
Admin Mode
Default:
IGMP Snooping debugging switch is disabled on the switch by default.
Usage Guide:
The command is used for enable the IGMP Snooping debugging switch of the switch, switch IGMP data packet
message can be shown with “packet” parameter, event message with “event”, timer message with “time”,
downsending hardware entries message with “mfc”, and all debugging messages with “all”.
35.2.4 ip igmp snooping
Command:
ip igmp snooping
no ip igmp snooping
Function:
Enable the IGMP Snooping function; the “no ip igmp snooping” command disables this function.
Command mode:
Global Mode
Default:
IGMP Snooping is disabled by default.
Usage Guide: