PLANET WGSW-52040 - Manual (Page 201)

11-200
<IFNAME>: name of the port that the debugging will be enabled or disabled.
Command Mode:
Admin mode
Default:
Disable.
Usage Guide:
N/A.
Example:
Enable the debugging of OAM error information for ethernet1/1.
Switch#debug ethernet-oam error interface ethernet1/1
11.3 debug ethernet-oam fsm
Command:
debug ethernet-oam fsm {all | Discovery | Transmit} [interface {ethernet |} <IFNAME>]
no debug ethernet-oam fsm {all | Discovery | Transmit} [interface {ethernet |} <IFNAME>]
Function:
Enable the debugging of OAM state machine, no command disables it.
Parameters:
: name of the port that the debugging will be enabled or disabled
Command Mode:
Admin mode
Default:
Disable.
Usage Guide:
N/A.
Example:
Enable the debugging of Discovery state machine for ethernet1/1.