PLANET WGSW-52040 - Manual (Page 173)

7-172
Switch(config)#uldp hello-interval 12
7.11 uldp manual-shutdown
Command:
uldp manual-shutdown
no uldp manual-shutdown
Function:
To configure ULDP to work in manual shutdown mode. The no command will restore the automatic mode.
Parameters:
None.
Command Mode:
Global Configuration Mode.
Default:
Auto mode.
Usage Guide:
This command can be issued only if ULDP has been enabled globally.
Example:
To enable manual shutdown globally.
Switch(config)#uldp manual-shutdown
7.12 uldp recovery-time
Command:
uldp recovery-time
no uldp recovery-time
Function:
To configure the interval for ULDP recovery timer. The no form of this command will restore the default configuration.