PLANET WGSW-52040 - Manual (Page 350)

19-119
Parameter:
tx-hold-count-value: ranging from 1 to 20, the default value is 10.
Command mode:
Global Mode
Default:
10.
Usage Guide:
Set the max number for sending BPDU within the Hello Time interval to control BPDU flow. The variable is used to
whole MST bridge.
Example:
Set the max transmit-hold-count as 20.
Switch(config)#spanning-tree transmit-hold-count 20
19.2 Commands for Monitor and Debug
19.2.1 debug spanning-tree
Command:
debug spanning-tree
no debug spanning-tree
Function:
Enable the MSTP debugging information; the command “no debug spanning-tree” disables the MSTP debugging
information.
Command mode:
Admin Mode
Usage Guide:
This command is the general switch for all the MSTP debugging. Users should enable the detailed debugging
information, and then they can use this command to display the relevant debugging information. In general, this
command is used by skilled technicians.