PLANET WGSW-52040 - Manual (Page 450)

28-61
Default:
No WINS server is configured by default.
Command Mode:
DHCP Address Pool Mode
Usage Guide:
This command is used to specify WINS server for the client, up to 8 WINS server addresses can be configured. The
WINS server address assigned first has the highest priority. Therefore, address 1 has the highest priority, and
address 2 the second, and so on.
Example:
Setting the server address of DHCP pool “1” to 192.168.1.1.
Switch(dhcp-1-config)#netbios-name-server 192.168.1.1
28.1.24 netbios-node-type
Command:
netbios-node-type {b-node | h-node | m-node | p-node | }
no netbios-node-type
Function:
Sets the node type for the specified port; the “no netbios-node-type” command cancels the setting.
Parameters:
b-node stands for broadcasting node, h-node for hybrid node that broadcasts after point-to-point communication;
m-node for hybrid node to communicate in point-to-point after broadcast; p-node for point-to-point node;
is the node type in Hex from 0 to FF.
Default:
No client node type is specified by default.
Command Mode:
DHCP Address Pool Mode
Usage Guide: