PLANET WGSW-52040 - Manual (Page 50)

1-49
Global Mode
Usage Guide:
Set the association between host and IP address, which can be used in commands like “ping “.
Example:
Set IP address of a host with the hostname of “beijing” to 200.121.1.1.
Switch(config)#ip host beijing 200.121.1.1
Command related: telnet, ping, traceroute
1.1.17 ipv6 host
Command:
ipv6 host
no ipv6 host { | all}
Function:
Configure the mapping relationship between the IPv6 address and the host; the no command deletes this mapping
relationship.
Parameter:
is the name of the host, containing max 64 characters; is the IPv6 address
corresponding to the host name. all is all the host address.
Command Mode:
Global Mode
Usage Guide:
Configure a fixed corresponding relationship between the host and the IPv6 address, applicable in commands such
as traceroute6 , etc.
Example:
Set the IPv6 address of the host named beijing to 2001:1:2:3::1.
Switch(config)#ipv6 host beijing 2001:1:2:3::1
Command related: ping6, traceroute6