PLANET WGSW-52040 - Manual (Page 511)

32-51
32.1.11 ipv6 dhcp server subscriber-id option
Command:
ipv6 dhcp server subscriber-id option
no ipv6 dhcp server subscriber-id option
Function:
This command enables DHCPv6 server to support the identification of option 38, the no operation of this command
disables it.
Parameters:
None.
Default:
Do not support option 38.
Command Mode:
Global configuration mode
Usage Guide:
Configure this command if option 38 is expected to be identified and processed by DHCPv6 server, otherwise they
will be ignored. option 38 is not supported by default.
Example:
Enable DHCPv6 server to support option 38.
Switch(Config)# ipv6 dhcp server subscriber-id option
32.1.12 ipv6 dhcp snooping remote-id
Command:
ipv6 dhcp snooping remote-id <remote-id>
no ipv6 dhcp snooping remote-id
Function:
This command is used to set the form of adding option 37 in received DHCPv6 request packets, of which
is the content of remote-id in user-defined option 37 and it is a string with a length of less than 128. The
no form of this command restores remote-id in option 37 to enterprise-number together with vlan MAC address.