PLANET WGSW-52040 - Manual (Page 766)

52-306
Command Mode:
MRPP ring mode
Default:
Default configuration timer interval is 1s.
Usage Guide:
The primary node of MRPP ring continuously sends Hello packet on configured Hello timer interval, if secondary port
of primary node can receive this packet in configured period; the whole loop is normal, otherwise fail. Transfer node
of MRPP ring doesn’t need this timer and configure.
Example:
Configure hello-timer of MRPP ring 4000 to 3 seconds.
Switch(config)# mrpp ring 4000
Switch(mrpp-ring-4000)#hello-timer 3
52.8 mrpp eaps compatible
Command:
mrpp eaps compatible
no mrpp eaps compatible
Function:
Enable the compatible mode for EAPS, the no command disables the compatible mode.
Parameter:
None.
Command Mode:
Global mode
Default:
Disable the compatible function of EAPS.
Usage Guide:
If the compatible function of EAPS needs to be configured, MRPP protocol should be enabled firstly. When executing
no mrpp eaps compatible command, it should ensure that the switch has enabled MRPP protocol.