PLANET WGSW-52040 - Manual (Page 189)

8-188
8.18 show lldp neighbors interface ethernet
Command:
show lldp neighbors interface ethernet < IFNAME >
Function:
Display the LLDP neighbor information of the port.
Parameters:
None.
Default:
Do not display the LLDP neighbor information of the port.
Command Mode:
Admin Mode, Global Mode.
Usage Guide:
Users can check the LLDP neighbor information of the port by using “show lldp neighbors interface ethernet XXX”.
Example:
Check the LLDP neighbor information of the port after LLDP is enabled on the port.
Switch(config)#show lldp neighbors interface ethernet 1/1
8.19 show lldp traffic
Command:
show lldp traffic
Function:
Display the statistics of LLDP data packets.
Parameters:
None.
Default:
Do not display the statistics of LLDP data packets.
Command Mode: