PLANET WGSW-52040 - Manual (Page 379)

20-148
20.23 show mls qos maps
Command:
show mls qos maps [cos-intp | cos-dp | dscp-intp | dscp-dp | dscp-dscp] | [begin | include | exclude
]
Function:
Display the configuration of QoS mapping.
Parameters:
cos-intp: The mapping from ingress L2 CoS to internal priority
cos-dp: The mapping from ingress L2 COS to the dropping priority
dscp-intp: The mapping from ingress DSCP to internal priority
dscp-dp： The mapping from ingress DSCP to the dropping priority
intp-dscp： The mapping from egress interior priority to DSCP
Default:
None.
Command mode:
Admin and Configuration Mode.
Usage Guide:
Display the map configuration information of QoS.
Example:
Display configuration information of the mapping table.
Ingress COS-TO-Internal-Priority map:
COS: 0 1 2 3 4 5 6 7
-----------------------------------------
INTP: 0 1 2 3 4 5 6 7
Ingress DSCP-TO-Internal-Priority map:
d1 : d2 0 1 2 3 4 5 6 7 8 9
0: 0 0 0 0 0 0 0 0 1 1
1: 1 1 1 1 1 1 2 2 2 2
2: 2 2 2 2 3 3 3 3 3 3
3: 3 3 4 4 4 4 4 4 4 4
4: 5 5 5 5 5 5 5 5 6 6