PLANET WGSW-52040 - Manual (Page 718)

48-258
Port mode
Default:
This configuration is null.
Usage Guide:
Configure remote-id for each port, if there is no configuration, use switch’s MAC as remote-id value.
Example:
Configure remote-id as abcd on port ethernet1/2.
Switch(config-if-ethernet1/2)# pppoe intermediate-agent remote-id abcd
48.8 pppoe intermediate-agent trust
Command:
pppoe intermediate-agent trust
no pppoe intermediate-agent trust
Function:
Configure the port as trust port, the no command configures the port as untrust port.
Parameter:
None.
Command Mode:
Port mode
Default:
Untrust port.
Usage Guide:
The port which connect to server must be configured as trust port. Note: At least one trust port is connected to
PPPoE server.
Example:
Configure port ethernet1/1 as trust port.
Switch(config-if-ethernet1/1)#pppoe intermediate-agent trust