PLANET WGSW-52040 - Manual (Page 70)

1-69
Example:
Binding standard IP ACL protocol to access-class 1.
Switch(config)#authentication ip access-class 1 in
1.2.6 authentication ipv6 access-class
Command:
authentication ipv6 access-class {|}
no authentication ipv6 access-class
Function:
Binding standard IPv6 ACL protocol to login with Telnet/SSH/Web; the no form command will cancel the binding ACL.
Parameters:
is the access-class number for standard numeric ACL, ranging between 500-599; is the
access-class name for standard ACL, the character string length is ranging between 1 and 32.
Default:
The binding ACL to Telnet/SSH/Web function is closed by default.
Command Mode:
Global Mode.
Example:
Binding standard IP ACL protocol to access-class 500.
Switch(config)#authentication ipv6 access-class 500 in
1.2.7 authentication line login
Command:
authentication line {console | vty | web} login method1 [method2…]
no authentication line {console | vty | web} login
Function:
Configure VTY (login with Telnet and SSH), Web and Console, so as to select the list of the authentication method
for the login user. The no form command restores the default authentication method.