PLANET WGSW-52040 - Manual (Page 843)

62-383
Address Request Id
192.168.11.141 1
192.168.11.138 2
62.11 ip domain-lookup
Command:
ip domain-lookup
no ip domain-lookup
Function:
To enable/disable DNS function, whether the switch will send dynamic DNS domain queries to the real DNS server
or not.
Parameter:
None.
Command Mode:
Global Mode.
Default:
Disabled.
Usage Guide:
This command is used to enable or disable the switch DNS dynamic query function. If DNS dynamic query function
is enabled, the DNS server will resolve the host name and domain name to the IPv4 or IPv6 address for requests
from the clients. If DNS is disabled, client applications will not be able to send any DNS requests to the DNS server.
In this situation, only the static address resolution is available. For the address mapping in the resolve cache, which
is learnt through DNS before, will be invalid after aging.
Example:
To enable DNS function, can resolve the domain name dynamic.
Switch(config)# ip domain-lookup