PLANET WGSW-52040 - Manual (Page 298)

17-67
17.3.9 show protocol-vlan
Command:
show portocol-vlan
Function:
Display the configuration of Protocol-based VLAN on the switch.
Parameter:
None.
Command Mode:
Admin Mode and Configuration Mode
Usage Guide:
Display the configuration of Protocol-based VLAN on the switch.
Example:
Display the configuration of the current Protocol-based VLAN.
Switch#show protocol-vlan
Protocol_Type VLAN_ID Priority
------------------- ------------- ---------
etype 0x800 200 4
etype 0x860 200 4
etype 0xabc 100 5
17.3.10 show subnet-vlan
Command:
show subnet-vlan
Function:
Display the configuration of the IP-subnet-based VLAN on the switch.
Parameter: