PLANET WGSW-52040 - Manual (Page 128)

3-127
3.8 cluster member auto-to-user
Command:
cluster member auto-to-user
Function:
All members will be deleted when configuring no cluster auto-add. Users need to change automatically added
members to manually added ones to keep them.
Parameter:
None.
Default:
None.
Command Mode:
Global Mode.
Usage Guide:
Execute this command on a switch to change automatically added members to manually added ones.
Example:
change automatically added members to manually added ones.
Switch(config)#cluster member auto-to-user
3.9 cluster reset member
Command:
cluster reset member [id | mac-address ]
Function:
In the commander switch, this command can be used to reset the member switch.
Parameter:
member-id: ranging from 1 to 128. Use hyphen “-” or semicolon “;” to specify more than one member; if no value is