PLANET WGSW-52040 - Manual (Page 561)

35-101
Command Mode:
Admin Mode and Global Mode
Usage Guide:
The command displays multicast policy of configuration
Example:
Switch#show ip multicast policy
ip multicast-policy 10.1.1.0/24 225.0.0.0/8 cos 5
35.1.13 show ip multicast source-control
Command:
show ip multicast source-control [detail]
show ip multicast source-control interface [detail]
Function:
Display multicast source control configuration
Parameter:
detail: expresses if it displays information in detail.
: interface name, such as Ethernet 1/1 or ethernet1/1.
Default:
None
Command Mode:
Admin Mode and Global Mode
Usage Guide:
The command displays multicast source control rules of configuration, including detail option, and access-list
information applied in detail.
Example:
Switch#show ip multicast source-control detail
ip multicast source-control is enabled
Interface Ethernet1/13 use multicast source control access-list 5000