PLANET WGSW-52040 - Manual (Page 755)

51-295
51.2 Commands for Monitor and Debug
51.2.1 debug ipv6 dhcp snooping binding
Command:
debug ipv6 dhcp snooping binding
no debug ipv6 dhcp snooping binding
Function:
Enable binding debug of dhcp type for SAVI, no command disables the debug.
Parameter:
None.
Command Mode:
Admin Mode.
Default:
None.
Usage Guide:
After enable this function, the relative binding of dhcp type or static type create the print information for misarranging.
The no command disables this function.
Example:
Enable the binding debug of dhcp type.
Switch#debug ipv6 dhcp snooping binding
51.2.2 debug ipv6 dhcp snooping event
Command:
debug ipv6 dhcp snooping event
no debug ipv6 dhcp snooping event
Function:
Enable event debug of dhcp type for SAVI, no command disables the debug.
Parameter:
None.