PLANET WGSW-52040 - Manual (Page 642)

39-182
Usage Guide:
To implement integrated solution, the switch must be enabled to use private 802.1x protocol, or many applications
will not be able to function. For detailed information, please refer to DCBI integrated solution. If the switch forces the
authentication client to use private 802.1x protocol, the standard client will not be able to work.
Example:
To force the authentication client to use private 802.1x authentication protocol.
Switch(config)#dot1x privateclient enable
39.21 dot1x privateclient protect enable
Command:
dot1x privateclient protect enable
no dot1x privateclient protect enable
Function:
Enable the privateclient protect function of the switch, the no command disables the protect function.
Parameter:
None.
Command mode:
Global Mode
Default:
Disable the privateclient protect function.
Usage Guide:
Support the partial encryption of the privateclient protocol to advance the security of the privateclient.
Example:
Enable the privateclient protect function of the switch.
Switch(config)#dot1x privateclient protect enable