PLANET WGSW-52040 - Manual (Page 764)

52-304
Switch(config-If-Ethernet1/1)#mrpp ring 4000 primary-port
Switch(config)#in ethernet 1/3
Switch(config-If-Ethernet1/3)#mrpp ring 4000 secondary-port
52.5 errp domain
Command:
errp domain <domain-id>
no errp domain <domain-id>
Function:
Create ERRP domain, the no command deletes the configured ERRP domain.
Parameter:
<domain-id> domain ID of ERRP, the range between 1 and 15.
Command Mode:
Global mode
Usage Guide:
If domain ID of ERRP needs to be configured, the compatible mode of ERRP should be enabled firstly. When
executing this command, it should create a new ERRP domain if there is no ERRP domain. However, the no
command is used to delete the corresponding domain ID of ERRP.
Example:
Configure domain ID for ERRP globally.
Switch(Config)#errp domain 1
52.6 fail-timer
Command:
fail-timer >
no fail-timer
Function: