PLANET WGSW-52040 - Manual (Page 832)

60-372
None.
Example:
Switch# show ntp status
Clock status: synchronized
Clock stratum: 3
Reference clock server: 1.1.1.2
Clock offset: 0.010 s
Root delay: 0.012 ms
Root dispersion: 0.000 ms
Reference time: TUE JAN 03 01:27:24 2006
60.18 show ntp session
Command:
show ntp session [<ip-address> | ]
Function:
To display the information of all NTP session or one specific session, include server ID, server layer, and the local
offset according to server. (The symbol * means this server is the selected local time source)
Parameter:
ip-address: The IPv4 address of some specifics configured time server.
ipv6-address: The IPv6 address of some specifics configured time server.
If no parameter, the session relative information of all servers will be displayed (Include broadcast and multicast
servers)
Default:
None.
Command Mode:
Admin and Configuration Mode.
Usage Guide:
None.
Example:
(Switch)# show ntp session