PLANET WGSW-52040 - Manual (Page 608)

38-148
Function:
Create a named extended IP access list. The no prefix will remove the named extended IP access list including all
the rules.
Parameters:
is the name of the access list. The name can be formed by non-all-digit characters of length of 1 to 32.
Command Mode:
Global Mode.
Default:
No access list is configured by default.
Usage Guide:
When this command is issued for the first time, an empty access list will be created.
Example:
To create a extended IP access list name tcpFlow.
Switch(config)#ip access-list extended tcpFlow
38.11 ip access standard
Command:
ip access standard <name>
no ip access standard <name>
Function:
Create a named standard access list. The no prefix will remove the named standard access list including all the rules
in the list.
Parameters:
<name> is the name of the access list. The name can be formed by non-all-digit characters of length of 1 to 32.
Command Mode:
Global Mode.
Default: