PLANET WGSW-52040 - Manual (Page 776)

53-316
None.
Example:
Show the error information of ULPP.
Switch# debug ulpp error
Unrecognized Flush packet received.
53.4 debug ulpp event
Command:
debug ulpp event
no debug ulpp event
Function:
Show the event information of ULPP. The no operation disables showing the event information of ULPP.
Parameter:
None.
Default:
Do not display.
Command mode:
Admin mode.
Usage Guide:
None.
Example:
Show the event information of ULPP.
Switch# debug ulpp event
ULPP group 1 state changes:
Master port ethernet 1/1 in ULPP group 1 changed state to Forwading.
Slave port ethernet 1/2 in ULPP group 1 changed state to Standby.