PLANET WGSW-52040 - Manual (Page 772)

52-312
Default:
Default the node mode is secondary node.
Usage Guide:
None.
Example:
Configure the switch to primary node. MRPP ring 4000.
Switch(config)# mrpp ring 4000
Switch(mrpp-ring-4000)#node-mode master
52.16 show mrpp
Command:
show mrpp [<ring-id>]
Function:
Display MRPP ring configuration.
Parameter:
is MRPP ring ID, the valid range is from 1 to 4096, if not specified ID, it display all of MRPP ring
configuration.
Command Mode:
Admin and Configuration Mode.
Default:
None
Usage Guide:
None
Example:
Display configuration of MRPP ring 4000 of switch
Switch# show mrpp 4000