PLANET WGSW-52040 - Manual (Page 702)

46-242
Command Mode:
Admin and Configuration Mode.
Example:
Switch# show ipv6 security-ra
IPv6 security ra config and state information in the switch
Global IPv6 Security RA State: Enable
Ethernet1/1
IPv6 Security RA State: Yes
Ethernet1/3
IPv6 Security RA State: Yes
46.4 debug ipv6 security-ra
Command:
debug ipv6 security-ra
no debug ipv6 security-ra
Function:
Enable the debug information of IPv6 security RA; the no operation of this command will disable the debug
information of IPv6 security RA.
Command Mode:
Admin Mode.
Parameters:
None.
Usage Guide:
Users can check the proceeds of message handling of IPv6 security RA, which will help investigate the causes to
problems if there is any.
Example:
Enable the debug information of IPv6 security RA.
Switch#debug ipv security-ra