PLANET WGSW-52040 - Manual (Page 845)

62-385
None.
Command Mode:
Global Mode.
Default:
Disabled by default.
Usage Guide:
After the DNS SERVER function is enabled, the switch will be able to receive and handle DNS Requests from the
clients by looking up locally or forward the request to the real DNS server.
Example:
Configure to enable the dns server function of the switch.
Switch(config)#ip dns server
62.14 ip dns server queue maximum
Command:
ip dns server queue maximum <1-5000>
no ip dns server queue maximum
Function:
Configure the max number of client information in the switch queue.
Parameter:
<1-5000> the value can be 1－5000.
Command Mode:
Global Mode.
Default:
The default client number is 3000.
Usage Guide:
When receiving a DNS Request from a client, the switch will cache the client’s information. But the number of
client information in the queue should not exceed the configured maximum number; otherwise the client’s request