PLANET WGSW-52040 - Manual (Page 370)

20-139
Command mode:
Policy class map configuration Mode
Usage Guide:
The same policy set can be referred to by different policy class maps.
Example:
Create class-map, the match rule is the cos value is 0; policy-map is 1, enter the policy map mode, set the Policy and
choose the color policy for the current list.
Switch(config)#class-map cm
Switch(config-classmap-cm)#match cos 0
Switch(config-classmap-cm)#exit
Switch(config)#policy-map 1
Switch(config-policymap-1)#class cm
Switch(config-policymap-1-class-cm)#policy aggregate color
20.16 policy-map
Command:
policy-map <policy-map-name>
no policy-map <policy-map-name>
Function:
Creates a policy map and enters the policy map mode; the “no policy-map <policy-map-name>” command deletes
the specified policy map.
Parameters:
<policy-map-name> is the policy map name.
Default:
No policy map is configured by default.
Command mode:
Global Mode
Usage Guide:
Policy class map opertion can be done in policy map configuration mode.
Example: