PLANET WGSW-52040 - Manual (Page 680)

44-220
44.5 debug aaa detail attribute
Command:
debug aaa detail attribute interface {ethernet <interface-number> | <interface-name>}
no debug aaa detail attribute interface {ethernet <interface-number> | <interface-name>}
Function:
Enable the debug information of AAA about Radius attribute details; the no operation of this command will disable
that debug information.
Parameters:
: the number of the interface.
<interface-name>: the name of the interface.
Command Mode:
Admin Mode.
Usage Guide:
By enabling the debug information of AAA about Radius attribute details, users can check Radius attribute details of
Radius messages, which might help diagnose the cause of faults if there is any.
Example:
Enable the debug information of aaa about Radius attribute details on interface 1/1.
Switch#debug detail attribute interface Ethernet 1/1
44.6 debug aaa detail connection
Command:
debug aaa detail connection
no debug aaa detail connection
Function:
Enable the debug information of aaa about connection details; the no operation of this command will disable that
debug information.
Parameters:
None.