PLANET WGSW-52040 - Manual (Page 396)

23-7
Function:
ICMP data packets receive/send debug message.
Parameter:
None
Default:
None
Command Mode:
Admin Mode
Usage Guide:
None
Example:
Switch#debug ipv6 icmp
IPv6 ICMP: sent, type <129>, src <2003::1>, dst <2003::20a:ebff:fe26:8a49> from Vlan1
Displayed information Explanation
IPv6 ICMP: sent Send IPv6 data report
type <129> Ping protocol No.
src <2003::1> Source IPv6 address
dst <2003::20a:ebff:fe26:8a49> Destination IPv6 address
from Vlan1 Layer 3 port being sent
23.2.7 debug ipv6 nd
Command:
debug ipv6 nd [ns | na | rs | ra | redirect]
no debug ipv6 nd [ ns | na | rs | ra | redirect ]
Function:
Enable the debug of receiving and sending operations for specified types of IPv6 ND messages. The ns, na, rs, ra
and redirect parameters represent neighbor solicitation, neighbor advertisement, route solicitation, route
advertisement and route redirect. No specification means to enable the debug for all five types of ND message. The