PLANET WGSW-52040 - Manual (Page 105)

1-104
1.4.22 snmp-server view
Command:
snmp-server view {include | exclude}
no snmp-server view [ ]
Function:
This command is used to create or renew the view information; the “no" form of this command deletes the view
information.
Command Mode:
Global Mode.
Parameter:
view name, containing 1-32 characters.
<oid-string> is OID number or corresponding node name, containing 1-255 characters.
include | exclude, include/exclude this OID.
Usage Guide:
The command supports not only the input using the character string of the variable OID as parameter. But also
supports the input using the node name of the parameter.
Example:
Create a view, the name is readview, including iso node but not including the iso.3 node
Switch(config)#snmp-server view readview iso include
Switch(config)#snmp-server view readview iso.3 exclude
Delete the view
Switch(config)#no snmp-server view readview
1.5 Commands for Switch Upgrade
1.5.1 copy（FTP）
Command:
copy [ascii | binary]
Function: