PLANET WGSW-52040 - Manual (Page 569)

35-109
Parameters:
vlan-id is the id of the VLAN, limited to <1-4094>. version is the version number, limited to <1-3>.
Command Mode:
Global mode.
Default:
version 3.
Usage Guide:
When the switch is connected to V1 and V2 capable environment, and for VLAN which has source of layer 2 query
configuration, the VLAN can be queried only if the version number has been specified. This command is used to
query the layer 2 version number.
Example:
Switch(config)#ip igmp snooping vlan 2 L2-general-query-version 2
35.2.11 ip igmp snooping vlan limit
Command:
ip igmp snooping vlan limit {group | source }
no ip igmp snooping vlan limit
Function:
Configure the max group count of VLAN and the max source count of every group. The “no ip igmp snooping vlan
limit” command cancels this configuration.
Parameter:
is the VLAN number.
g_limit：<1-65535>, max number of groups joined.
s_limit：<1-65535>, max number of source entries in each group, consisting of include source and exclude source.
Command mode:
Global Mode.
Default: