PLANET WGSW-52040 - Manual (Page 860)

63-400
Default:
None.
Command mode:
Admin and configuration mode.
Usage Guide:
Check the log information source (include information channel, the information severity level) by show logging
mstp command.
Example:
Show the log information source of MSTP.
Switch#show logging source mstp
system module log switch status:
Channel Onoff Severity
logbuff on warning
loghost on warning
terminal on warning
63.17 show memory
Command:
show memory [usage]
Function:
Display the contents in the memory.
Parameter:
usage means memory use information.
Command mode:
Admin Mode
Usage Guide:
This command is used for switch debug purposes. The command will interactively prompt the user to enter start
address of the desired information in the memory and output word number. The displayed information consists of
three parts: address, Hex view of the information and character view.