PLANET WGSW-52040 - Manual (Page 722)

48-262
Default:
This configuration is null.
Usage Guide:
This command is used to configure global circuit id, the priority is higher than pppoe intermediate-agent
access-node-id command. circuit-id value is access-node-id +” eth “+ Slot ID + delimiter + Port Index + delimiter +
Vlan ID, access-node-id occupies n bytes (n<48), “ eth “ is space + e + t + h + space, it occupies 5 bytes, Slot ID
occupies 2 bytes, Port Index occupies 3 bytes, Vlan ID occupies 4 bytes, delimiter occupies 1 byte.
Example:
Configure access-node-id as xyz, use spv combination mode, delimiter with “#”between Slot ID and Port ID, delimiter
with “/”between Port ID and Vlan ID.
Switch(config)#pppoe intermediate-agent identifier-string xyz option spv delimiter # delimiter /
Switch# show pppoe intermediate-agent identifier-string option delimiter
config identifier string is : xyz
config option is : slot , port and vlan
the first delimiter is : "# "
the second delimiter is : "/ "
After port ethernet1/3 of vlan3 receives PPPoE packets, circuit-id value of the added vendor tag is ”xyz eth
01#003/0003”.
48.13 pppoe intermediate-agent vendor-tag strip
Command:
pppoe intermediate-agent vendor-tag strip
no pppoe intermediate-agent vendor-tag strip
Function:
Enable vendor-tag strip function of the port, the no command cancels this function.
Parameter:
None.
Command Mode:
Port mode
Default: