PLANET WGSW-52040 - Manual (Page 749)

51-289
Function:
Configure the static or dynamic binding function manually; the no command deletes the configured binding.
Parameter:
ip-address: is the unicast IPv6 address, including local link and global unicast address
mac-address: is the mac address of Ethernet
if-name: is the port name, like interface ethernet 1/1
slaac|dhcp: slaac means create the dynamic binding for slaac type, dhcp means create the dynamic binding for
dhcp type
lifetime: configure the lifetime period for the dynamic binding, the unit is second.
static: create the binding of the static type.
Command Mode:
Global Mode.
Default:
None.
Usage Guide:
After the dynamic binding configured by handwork is overtime, the corresponding binding will be deleted but the
configuration is still be kept, so the binding still be shown. If the binding needs to take effect again, it should delete it
first and configure a new binding again.
When the binding type is static type, do not configure lifetime period, the lifetime period is infinite.
Example:
Configure the dynamic binding of slaac type for SAVI manually.
Switch(config)#savi ipv6 check source binding ip 2001::10 mac 00-25-64-BB-8F-04 Interface ethernet1/1 type slaac
lifetime 2010
Configure the static binding for SAVI manually.
Switch(config)#savi ipv6 check source binding ip 2001::20 mac 00-25-64-BB-8F-04
Interface ethernet1/1 type static
51.1.9 savi ipv6 check source ip-address mac-address
Command:
savi ipv6 check source [ip-address mac-address | ip-address | mac-address]