PLANET WGSW-52040 - Manual (Page 239)

14-8
14.2 {description-language | province-state | city | county |
street | locationNum | location | floor | room | postal | otherInfo}
Command:
{description-language | province-state | city | county | street | locationNum | location | floor | room | postal |
otherInfo}
no {description-language | province-state | city | county | street | locationNum | location | floor | room | postal
| otherInfo}
Function:
Configure the detailed location after enter Civic Address LCI address mode of the port.
Parameters:
description-language: language for describing location, such as ‘English’
province-state: state, canton, region, province prefecture, and so on, such as ‘clara’
city: city, such as ‘New York’
county: county, parish, such as ‘santa clara’
street: street, such as ‘1301 Shoreway Road’
locationNum: house number, such as ‘9’
location: name and occupant of a location, such as ‘Carrillo's Holiday Market’
floor: floor number, such as ‘13’
room: room number, such as ‘1308’
postal: postal/zip code, such as ‘10027-1234’
otherInfo: Additional location information, such as ‘South Wing’
address: detailed address information, it cannot exceed 250 characters
Default:
No detailed information of the location with Civic Address LCI is configured on the port.
Command Mode:
Civic Address LCI address mode
Usage Guide:
With this command, configure the detailed information of the location with Civic Address LCI on the port, it is able to
configure 10 kinds of address types at most.
Example:
Configure the detailed location information in Civic Address LCI address mode.
Switch(Med-Civic)# city Beijing
Switch(Med-Civic)# street shangdi