PLANET WGSW-52040 - Manual (Page 416)

23-27
Matched ARP entry number matching the filter conditions.
Verifying ARP entry number at verifying again validity for ARP.
InCompleted ARP entry number have ARP request sent without ARP
reply.
Failed ARP entry number at failed state.
None ARP entry number at begin-found state.
Address IP address of ARP entries.
Hardware Address MAC address of ARP entries.
Interface Layer 3 interface corresponding to the ARP entry.
Port Physical (Layer2) port corresponding to the ARP entry.
Flag Describes whether ARP entry is dynamic or static.
23.3.6 show arp traffic
Command:
show arp traffic
Function:
Display the statistic information of ARP messages of the switch. For box switches, this command will only show
statistics of APP messages received and sent from the current boardcard.
Command mode:
Admin and Config Mode
Usage Guide:
Display statistics information of received and sent APP messages.
Example:
Switch#show arp traffic
ARP statistics:
Rcvd: 10 request, 5 response
Sent: 5 request, 10 response